Version 20 (modified by nfrisby, 2 years ago) (diff)


This pages serves as a public log what I did for my GHC internship from 21 Jan 2013 to 12 April 2013.

Plan for my internship summary

Compared to 351a8c6bbd53ce07d687b5a96afff77c4c9910cc, we implemented OPTIMIZATIONS with a cumulative effect of EFFECT on the generated code as well as EFFECT on the compiler's code. The hope is for the optimizations to have beneficial non-trivial interactions and to simplify/tidy the GHC code base.

general core knowledge

Max's page about code generation is really helpful!

Core Diving

  • emacs scroll-all-mode
    • use C-o to fix up horizontal alignment without skewing the cursors
  • navigate -ddump-*'s output via the * headers
  • lots of information: -dverbose-core2core + -ddump-inlinings
    • simplCore/Simplify has many pprTraces that are commented out
  • ghc --show-iface M.hi will dump its definitions
    • the unfolding of a wrapper is not shown, because it is actually not in the .hi file; it is reconstructed by TcIface.tcIfaceWrapper based on the type of it and the worker and the worker's demand information
  • diff -w can highlight major changes
    • with -dppr-cols=999999999
    • -dsuppress-uniques or sed -r 's/_:alnum:?{2,4}g' (or leave out the underscore)
      • removes most uniques
      • this sed is handy also for diffing .ticky files
  • a strictly demanded let and a thunk with an unlifted type both become cases in the STG.

Ticky Counters


  • UNKNOWN_CALL_ctr - put arguments on stack and call the RTS's stg_ap_<PAT>_fast routine for that argument pattern
  • KNOWN_CALL_ctr - "fast call": put arguments in registers and call the function's the fast entry point
  • KNOWN_CALL_TOO_FEW_ARGS_ctr - "PAP": creates a Partial APplication closure
  • KNOWN_CALL_EXTRA_ARGS_ctr - like a fast call, but first push a continuation onto the stack that effectively uses stg_ap_<PAT>_fast for the extra args
  • ALLOC_HEAP_tot is in words, and so are the allocation numbers for each id

Core -> STG -> CMM

TODO and _what you can learn by looking at each one_

Late Lambda Float

LLF = Late Lambda Float

As the GHC optimization papers explain, it is an early design decision to *not* perform lambda lifting. My initial project was to investigate the effects of aggressively floating lambdas to the top-level at the end of the core2core pipeline.

  • The main reason to not perform lambda lifting is that abstracting over free variables loses information and thereby inhibits *downstream* optimization.
  • Doing it *late* (ie just before CorePrep) circumvents this issue.
  • The original conjecture was that doing it would save allocation: a dynamically allocated closure becomes a static top-level function.
  • Max Bolingbroke did a quick implementation of this idea some years ago (~mid 2000s), but it seems it was abandoned. I don't know why.

Notes for Write-up

  • puzzle"s $fEnumItemType.$cenumFromThen has a nice demonstration: a cascade of let-no-escapes becomes a series of top-level functions, all tail-calls


We decided to implement LLF by re-using most of the FloatOut machinery.

FloatOut is structured in three phases.

  1. Annotate all expressions with their free variables.
  2. Consume those annotations while annotating each binder with the target "level" (essentially a depth wrt value lambdas) to which we want to float it.
  3. Consume those annotations while actually relocating the bindings.

We wholesale re-use the third phase (compiler/simplCore/FloatOut) with no changes, add logic to the middle phase, and enrich the first phase with more analyses.

Most of my changes were

  • Adding flags (compiler/main/DynFlags compiler/simplCore/CoreMonad compiler/simplCore/SimplCore)
  • Implementing the LLF logic in the first two FloatOut phases (compiler/simplCore/SetLevels)
  • Adding LLF to the core2core pipeline (compiler/simplCore/SimplCore)


In order to minimize factors, I decided to float only lambdas during LLF. Thus there is no need to perform FloatIn afterwards: all of our floats are to the top-level, so there will be nothing to FloatIn.

We placed LLF as the last pass before CorePrep. After experimentation, we decided to follow it with a simplifier pass.

The basic shape of things:

outer = CTX[let f x = RHS[x]
            in BODY[f]]

where outer is a top-level binding. LLF transforms this to:

poly_f FVS x = RHS[x]

outer = CTX[BODY[f FVS]]

wbere FVS are the free variables of RHS[x]. We'll use a, b, c, ... for particular variables in FVS.

The poly prefix is vestigial: in the past, floated bindings could never cross lambdas, so the abstracted variables were only type variables. Hence the machinery that adds the new parameters was only ever adding type parameters; it was creating polymorphic functions. The naming scheme was not updated when the machinery was enriched to also abstract over values.


  • join points
  • let-no-escape (LNE)
  • Note [join point abstraction]

Discovered Detriments of LLF

These are the various negative consequences that we discovered on the way. We discuss mitigation below.

  • Unapplied occurrences of f in BODY results in the creation of PAPs, which increases allocation. For example: map f xs becomes map (poly_f a b c) xs. Max had identified this issue earlier.
  • Abstracting over a known function might change a fast entry call in RHS to a slow entry call. For example, if CTX binds a to a lambda, that information is lost in the right-hand side of poly_f. This can increase runtime.
  • Replacing a floated binder's occurrence (ie f becomes poly_f a b c) can add free variables to a thunk's closure, which increases allocation.
  • Abstracting over a let-no-escape binder renders it a normal let, which increases allocation.

Mitigating PAP Creation

This is the simplest to mitigate: we do not float f if it ever occurs unapplied.

Mitigating Thunk Growth

In nucleic2, we floated a binding with 11 free variables. But this binder occurred in about 60 thunks, so many closures grew by ~11 pointers, giving a +2.2% allocation change (as opposed to -0.9%).

We've considered three heuristics for avoiding this. In ascending complexity:

  1. (easy) Limit the number of free variables the binding is allowed.
  2. in-thunk: If f occurs inside of a thunk in BODY, then limit its free variables.
  3. thunk-growth: Approximate the maximum number of free variables that floating f would add to a thunk in BODY, and limit that.

We did not implement the first one, since in-thunk is not very complicated. thunk-growth is significantly more complicated.

  • The question of whether f occurs in a thunk is not simple.
    • We count non-trivial arguments as thunks; but not all non-trivial arguments end up as thunks.
    • We do not count lambda-forms as thunks, since the lambda will hopefully be floated.
  • Estimating the effect of floating f on such a thunk's (call it t) closure size is more complicated.
    • Another floated function (say g) may also add some of f's free variables to t; we shouldn't penal both f and g for that.
    • If f itself has a free variable, say h, which is a binder that gets floated, then floating f will also add h's free variables to t.

Therefore, these are rough approximations. Being more accurate would require changing the setLevels pass instead of just the simpler first pass (the one that only analyzes the original term).

We tried limits of 32, 16, 8, and 4 to differentiate between the last two. At a limit of 8, the allocation increase in ida and puzzle were 1.3 and 2.9 percentage points better with thunk-growth than with in-thunk. But there were no differences around 10 --- which is the lowest we can go while improving nucleic2, anyway --- so we're adopting in-thunk for now.

There might have been some potential benefits to run-time from thunk-growth versus in-thunk (with limit=8, 35 percentage points better on constraint, eg), but we're not confident in those measurements.

Preserving Fast Entries

The first idea here was simply: do not float a binding if its RHS applies a free variable.

But since the idea was to avoid losing fast entries, this only applies to saturated and oversaturated calls. As a sanity check, however, I added two flags.

  • -f(no-)late-float-abstract-undersat-var don't allow undersaturated applications
  • -f(no-)late-float-abstract-sat-var don't allow saturated or oversaturated applications

Ever since, I've been doing parameter sweeps over these as we make other refinements to the system.

  • nn - do not float a binding that applies one of its free variables.
  • yn - do not float a binding that applies one of its free variables saturated or oversaturated.
  • ny - do not float a binding that applies one of its free variables undersaturated.
  • yy - do not restrict application of the binding's free variables

There was no variant that bested the others on most programs' runtime. And the data was so noisy that it was difficult to choose which tests to investigate. I eventually developed some bash script (I'm so sorry) to transpose the NoFib loops; instead of running the entire NoFib suite for one set of switches and then running it again for the next set of switches, and so on, I build all the variants, and then run each variant's version of each program sequentially. I intend for this to reduce noise by improving the time locality of the measurements of the same test. Even so, the noise in Runtime was bad. Eventually, I turned the iterations up to the 40/50 range and found some steadiness. To my surprise, there were a couple tests that had the best Runtime if we *do* abstract over functions with fast calls! This happens. More on this later (cf #puzzle-time-issue).

I also saw some surprises in allocation. Roughly, we expect that more floating means (barely) less allocation but worse runtime (by how much?) because some known calls become unknown calls. But, eg, going from nn -> yn --- ie floating functions that undersaturate free variables instead of not floating them --- caused worse allocation! This investigation led to #MitigatingLNEAbstraction.

Based on that example, it occurred to me that we should only restrict the binding's saturation of its *known* free variables... duh. For example, we should floating a binding even if its RHS exactly applies a free variable when that free variable is lambda bound. Not floating in that case has no benefit, and indeed was causing knock-on effects that increase allocation (eg #MitigatingLNEAbstraction).

After allocation leads to some code tweaks, I reran the Run time tests with high iterations. hpg and puzzle were odd cases where ny did the best, by far. Both have low run times, so I cranked the iterations up to 200. hpg's results change drastically, which I haven't yet resolved. But puzzle remained; see #puzzle-time-issue.

I have yet to determine that the preservation of fast entries is worth the trouble --- I certainly hope so... the parameter sweeps have taken a lot of time!

To enable further measurements, I have identified the semantics of some ticky counters, cf #TickyCounters, and started resurrecting useful ones that are no longer enabled.

Mitigating LNE Abstraction

We had actually already seen this for a non-lambda join point in knights, but we were preoccupied with the unintentional existence of non-lambda join points and moved on after fixing those. I re-discovered this while experimenting with the fast preservation variants above.

NB I think this will be mitigated "for free", since I'm predicting that we will never abstract variables that occur exactly saturated and an LNE binder can only be exactly saturated. If we do end up abstracting over saturated functions, we may want to consider mitigating this separately.

Using -flate-float-in-thunk-limit=10, -fprotect-last-arg, and -O1, I tested the libraries+NoFib for the four variants from #PreservingFastEntries. In fish (1.6%), hpg (~4.5%), and sphere (10.4%), allocation gets worse for ny and yy compared to nn and yn. The nn and ny do not change the allocation compared to the baseline library (ie no LLF).

The nn -> ny comparison is counter to our rough idea: floating more bindings (those that saturate/oversaturate some free variables) worsens allocation. Thus, I investigate.

The sphere program hammers hPutStr. Its extra allocation is mostly due to a regression in GHC.IO.Encoding.UTF8. Here's the situation.

With the nn variant:

outer a b c ... =
  let-no-escape f x = CTX[let-no-escape $j y = ... (f ...) ... in CTX2[$j]]
  in ...

In this case, $j is not floated because it applies f. With the ny variant, $j gets floated.

poly_$j a b c ... f y = ...

outer a b c ... =
  let f x = CTX[CTX2[poly_$j a b c ... f]]
  in ...

Thus f cannot be let-no-escape because it now occurs as an argument to poly_$j.

This contributes to sphere's 1 megabyte of extra allocation for two reasons:

  • outer is entered about 60,000 times.
  • The RHS of f has 13 free variables, so it's closure is rather large.

13*60,000 ~ 750,000. I suspect the rest of sphere's increase is due to a similar issue in GHC.IO.Handle.

In hpg, it's principally due to GHC.IO.Encoding.UTF8 again, with a second place contributor of GHC.IO.FD, where the function $wa17 is again like the outer example above, but with fewer free variables and thus less effect.

Discovered Benefits of LLF

We haven't seen as much decrease in allocation as we would have liked, but there have been some nice benefits:

Creates Inliner Opportunities

Floating functions to the top-level creates more opportunities for the inliner. We've found two ways.

  • #7663 - simulates having the inliner discount for free variables like it discounts for parameters
  • It also decreases size of functions by floating out internal let-bindings (eg big join points, etc).

Both of these have been observed on puzzle, with commit feec91b71, it-thunk-limit=10, protect-last-arg. We get a big improvement in both allocation (-15.1%) and runtime (-1.4%) by allowing fast entries to be abstracted over. Oddly, if we additionally disallow undersat known calls to be abstract over, we get another runtime boost (up to -3.9%). These are both unfortunate from the fast-entry perspective, but demonstrate a big win.

In particular, the worker for the derived equality function for the StateType contains a join-point. When the join-point is floated, the worker's Guidance goes from

IF_ARGS [70 70 80 0 60 60 60 0] 360 20


IF_ARGS [130 0 0 0 60 0 0 0] 220 20

while the floated join point itself gets a Guidance of

IF_ARGS [170 160 0 60 120 0 0] 300 60}

The loss of parameter discounts may be bad, but the reduction in size exemplifies a good thing.

But there's a bigger change in puzzle's main loop: $wtransfer gets a 28% reduction in allocation. Furthermore, one of its contained letrecs gets a 56% percent reduction. This results in a %15 percent reduction for the whole program.b

TODO I need ticky to track LNEs in order to pin down what's happening there.

Creates Simplifier Opportunities

Floating functions to the top-level creates more opportunities for the simplifier.

Abstracted from boyer2 (where f is a join point):

CTX[case a of [p1 -> let f x = ... in case a of ...]]

The let prevents the cases from being merged. Since LLF is so aggressive, it floats f when it otherwise wouldn't be, enabling the case merge.

Miscellaneous Findings

Thunk Join Points

We discovered that the worker-wrapper was removing the void argument from join points (eg knights and mandel2). This ultimately resulted in LLF *increasing* allocation. A thunk was let-no-escape before LLF but not after, since it occurred free in the right-hand side of a floated binding and hence now occurred (escapingly) as an argument.

SPJ was expecting no such non-lambda join points to exist. We identified where it was happening (WwLib.mkWorkerArgs) and switched it off. Here are the programs that with affected allocation.

protect-no  = allow wwlib to remove the last value argument
              (ie the previous behavior)

protect-yes = protect the last value argument from being removed
              (ie the experimental behavior)

Both are applied to both the libraries and the program.


        Program           protect-no     protect-yes
        circsim           1326468688           -0.7%
         hidden           1165299720           -0.7%
            scs           1029909256           -0.1%
      transform            738757608           -0.1%
      cacheprof            478120432           +0.3%
       listcopy            334710912           -0.4%
  comp_lab_zift            330889440           -5.0%
         fulsom            321534872           -0.3%
      listcompr            304662896           -0.4%
           anna             70685104           +0.1%
         gamteb             59846096           -0.3%
         parser             32406448           +0.2%
             gg              8970344           -0.2%

        -1 s.d.                -----           -0.6%
        +1 s.d.                -----           +0.5%
        Average                -----           -0.1%

In circsim, put gets 1,000,000 better and Text.Read.Lex gets a tiny bit better.

In hidden, it's Text.Read.Lex, Text.ParserCombinators.ReadP, and GHC.Read.

In cacheprof, $wpreparseline gets a bit worse.

In comp_lab_zift: f_make_tree gets 2,060,000 better and f_union_br gets 1,500 better.

In anna, StrictAn6.$wsa, SmallerLattice.$w$sslDijkstra_aux, SmallerLattice.$w$sslDijkstra_unlink get worse (10,000, 400, 400).

In parser, Main.leLex gets worse (5000).

In gg, Graph.$wprintFloat gets worse (12 -> 84).

Bigger swings in allocation (mostly good) took place in the programs themselves (eg transform.f_prmdef ~130,000 better, listcopy.f_se ~150,000 better).

Many of the Core differences were of the following form. For example, see circsim's put function. When protecting the last argument from being removed by WwLib.mkWorkerArgs, the Core looks like this:

let x :: RealWorld# -> ...
    x = \_void -> let d = ... in Ctor(... d ...) (... d ...) ...
in CTX[x]

Without protection, it looks like:

let d = ...
in CTX[Ctor(... d ...) (... d ...) ...]

Simon explained that it is probably the simplifier floating d out of the unprotected x binding *in order to reveal x as let-bound to a constructor*. Thus revealed, x is immediately inlined. Because of the \_void, this doesn't happen when the last argument is protected.

With protection, d isn't allocated unless x is entered, which might not always happen in CTX. This is a potential win because x might be let-no-escape.

A potential detriment of protection is that x is not exposed as a let-bound constructor. Simon conjectures that's not actually harmful. The reasoning is as follows.

These void arguments arise in two ways.

  • when join points are created
  • the strictness pass on constant functions

In both cases, it is unlikely that revealing the binding's RHS as a HNF will lead to any beneficial optimizations.

  • Join points are unlikely to be case-scrutinized. It's unlikely that further simplification will render them scrutinized.
  • Removing the value arg from constant functions would create sharing, which SPJ says is always a "dodgy" thing to do. If the programmer defines and uses a constant function, they may be trying to avoid retention of large data structures. I was concerned that such constant functions might arise upstream (eg from use of generics), but he regards that unlikely/not worth it (because the optimization is not always a good thing).
Affect on Expression Sizes

When we protect the void arguments from being removed by WwLib.mkWorkerArgs, we effect unfolding decisions.

  • The body of the let that keeps its void argument is bigger because of the void arg's lambda
  • It also gets a different result discount because of the lambda (instead of the lambda's body's result discount)
  • The entire let expression itself is larger because:
    • The let's body is larger (see above)
    • The occurrences of the let have the additional application (supplying the void actual)
  • Parameters' scrut discounts have also changed, but I didn't try figuring out why --- it was already clear we should do something about this.

Just turning on the -fprotect-last-arg flag was generally helpful for allocation. It was also generally helpful for runtime: somewhere between +1% and -3%. But a couple were > +4%. In a couple of those cases, I discovered that the increased expression size was breaching the unfolding creation threshold (in a base library module). This actual prevented some inlining.

I implemented the -funfolding-ignore-RealWorld flag by ignoring arguments of type State# RealWorld when measuring applications and lambdas. The only subtlety was that we still need to count the void args when considering whether to award the partial application result discount --- not counting the void args incorrectly awards the discount. That mistake means every invocation of a join point awards the rather large ufFunAppDiscount. In a couple programs, this increased allocation drastically because the newly inlined function's RHS included a join point that lost its LNE status at the call-site because the entire inlined RHS was case-scrutinized.



                          baseline       protect-no-ignore   protect-ignore
        circsim           1326471120           -0.7%           -0.7%
  comp_lab_zift            330889440           -5.0%           -5.0%
         hidden           1165309432           -0.7%           -0.7%
      listcompr            304662896           -0.4%           -0.4%
       listcopy            334710912           -0.4%           -0.4%
       maillist             92431136           +0.0%           -0.7%

Repeatable Elapsed Times

There are some good ones in the -3 to -5% range. This table is just the bad ones/ones where ignore made things worse.


           atom                 3.66           -0.1%           -2.2%           +2.0%
     bernouilli                 0.91           -0.4%           +0.7%           +1.8%
       cichelli                 0.34           +0.0%           -2.4%           +2.9%
       compress                 0.92           +0.0%           +0.4%           +1.3%
           fft2                 0.28           +0.0%           +0.0%           +5.7%
         genfft                 0.21           -0.9%           +2.8%           +3.8%
            hpg                 0.48           -1.3%           -2.5%           +4.2%
          infer                 0.36           -1.1%           -2.2%           -2.8%
       nucleic2                 0.26           +1.5%           +3.0%           +5.3%
            scs                 3.54           +0.2%           +0.8%           +2.7%
         simple                 1.33           -0.2%           -0.2%           +2.1%
          solid                 0.91           -0.0%           -1.1%           +0.4%
      transform                 1.86           -0.3%           -0.8%           +0.1%


           atom                 3.66           +0.2%           -2.1%           +1.8%
     bernouilli                 0.92           -0.6%           -0.1%           +0.1%
       cichelli                 0.34           +0.0%           -2.0%           +0.4%
       compress                 0.92           -0.5%           +0.1%           +1.3%
           fft2                 0.28           -0.2%           +0.2%           +5.5%
         genfft                 0.21           +0.3%           +4.7%           +4.1%
            hpg                 0.47           +0.3%           -1.6%           +4.9%
          infer                 0.36           +0.2%           -1.3%           -2.2%
       nucleic2                 0.26           +0.5%           +5.3%           +4.0%
            scs                 3.55           -0.1%           +0.7%           +2.4%
         simple                 1.32           +0.2%           -0.1%           +2.4%
          solid                 0.91           +0.4%           -0.3%           +0.6%
      transform                 1.85           +0.5%           -0.1%           +0.9%


       cichelli                 0.34           +0.0%           -1.7%           +0.5%
         genfft                 0.21           -0.5%           +4.3%           +4.1%
       nucleic2                 0.26           -0.1%           +4.0%           +4.3%
          solid                 0.91           -0.1%           -0.9%           +0.7%

TODO investigate

TODO see how this interacts with LLF


SPJ thought this may be another means of hoisting the let-no-escape functionality from the code generator into the core2core pipeline. LLF would handle let-no-escape lambdas, but it does not handle let-no-escape thunks (which we didn't initially realize were being identified).

Changing the let-no-escape thunks to \void -> ... closures upstream would then subject the binding to more optimisations. Formerly, it's non-lambda status meant that inlining it, eg, would lose sharing.

Late Strictness/WW

There are two core-to-core passes related to demand (= strictness & usage & CPR):

  • the demand analyzer pass (stranal/DmdAnal) and
  • the worker-wrapper split (stranal/WorkWrap).

The split currently happens once in the pipeline, and the demand analysis happens immediately before it.


This pair of passes can be enabled/disabled by -fstrictness flag.

Additionally, the demand analyzer is optionally be ran before each execution of some arbitrary phases of the simplifier using the -fstrictness-before flag. A few direct invocations of the simplifier, eg, after vectorisation, are not affected by this flag.

The Idea

The demands change as we optimize Core terms. The passes are careful to remove the demand info annotation when transforming a term in a way that invalidates the current demand info. Doing so, however, can hinder downstream optimizations. Running the strictness analyzer a second time may therefore be helpful.

The Design

I added to flags -flate-strictness and -flate-wwsplit.

  • -flate-strictness invokes the demand analyzer after SpecConstr.
  • -flat-wwsplit implies -flate-strictness and immediately follows it with a worker-wrapper split.

I placed them arbitrarily in the pipeline. But phase-ordering is known to have an impact, so maybe we should try running in between all other passes.

Initial Core Lint error

Enabling either flag caused a core lint error when compiling GHC.Float. (I anticipate that -fstrictness-before would have done the same.) Some cleverness in the .hi files was surreptitiously creating an ill-typed unfolding for GHC.Real.even. Here's why.

The unfolding for a wrapper function is not actually stored in a .hi file. This unfolding can be reconstructed based on the type of the function and the demand info it had when the split was performed. Thus only the name of the worker is stored in the .hi file and TcIface.tcIfaceWrapper rebuilds the wrapper's unfolding.

However, re-running the demand analyzer after the worker wrapper split may change the wrapper's demand info. In the program offending Core Lint, the new demand info results in a worker with an arity of 4 while the old info had an arity of 5.

For now, I've merely disabled the .hi cleverness;thusly storing the wrapper's actual unfolding works fine.

The initial measurements

Using different flag combinations, I built the libraries and ran nofib tests.

  1. baseline = -O1
  2. late-strictness = -O1 -flate-strictness
  3. late-wwsplit = -O1 -flate-wwsplit

NB the libraries are usually compiled with -O2.

Allocation changes:

  • allocation for late-strictness and late-wwsplit are always the same.
  • The big changes are all good, but nothing truly spectacular.
knights  2258392    -5.70%
fulsom   335718008  -2.50%
scs      1030151712 -1.60%
simple   226413112  -1.20%
pic      3528968    -0.20%
gamteb   59846096   -0.10%
gg       9159680    -0.10%

ansi     128632      0.10%
awards   292416      0.10%
expert   373048      0.10%
pretty   145640      0.10%
rfib     115688      0.10%
grep     72992       0.20%
mkhprog  3371224     0.20%
scc      59568       0.20%
tak      110136      0.30%
maillist 92431136    0.50%

Repeatable Elapsed time changes:

  • These don't necessarily include all *good* changes, but I think I caught all the bad ones.
              baseline   baseline2  late-strictness  wwsplit
atom          3.66       0.10%       3.00%            -1.10%
compress2     1.97       0.10%      -3.80%            -3.40%
fft           0.23       0.00%      -2.30%           -10.40%
integrate     0.66       0.30%      -0.20%            -4.10%
life          1.85       0.10%       1.90%             1.30%
para          1.65      -0.40%       0.20%            -3.40%
scs           3.59       0.60%      -0.90%           -12.50%
wave4main     1.18      -0.10%       1.90%             0.40%

cryptarithm1  2.36       0.10%      -1.90%             2.90%
fft2          0.28      -0.20%       0.10%             2.10%
genfft        0.21      -0.30%       1.90%             5.30%
hpg           0.47       0.10%      -3.00%             2.80%
integer       5.69      -0.20%      -0.70%             2.90%
transform     1.86      -0.20%      -0.20%             2.20%
treejoin      1.61       0.40%       1.10%             2.30%



  • knights - possibleMoves's letrec includes a join point: baseline, there's no demand info, but late-strictness records that it's strict in its first argument. Thus after CoreTidy, calls $j (case sNo {I# x -> I# (x -# 1)}) become case sNo {I# x -> $j (I# (x -# 1))}. By STG, the -# 1 gets floated out, and the sat thunk's closure is instead just the I# constructor's closure. This has many benefits, including saving us a word since we don't need the free variable. This is approximately what the ww-split version ends up doing, too, ww-split just makes the change more explicit in the Core and STG.
  • fulsom - A constructor argument (let a = case fv1 of D# x -> case fv2 of D# y -> D# (x +## y) in GHC.Float.timesDouble a a) becomes case fv1 of D# x -> case fv2 of D# y -> let a = x +## y in D# (a *## a). The let at an unlifted type is actually a case, and hence not allocated, eliminating a two-free-variable closure altogether. Moreover, the entry count of GHC.Float.timesDouble is halved.
  • scs - a hot recursive LNE has some lets converted to cases, since their strict demand is identified. 79,751,836 reduces to 77,930,374.
  • scs - GHC.Float.$w$sfloatToDigits1 allocates 95% as much as before (1070916 on 14098 entries).
  • scs - GHC.Float.$wfromRat'' no longer allocates, saving 170315 allocation on 37304 entries.
  • simple - a number of lets become cases, partly because revised_temperature is newly found strict in its second arg