Version 25 (modified by chak, 7 years ago) (diff) |
---|

DataParallel/ClosureConversion Up?

## Closure conversion without indexed types

The following scheme approaches the problem of mixing converted and unconverted code from the point of view of GHC's Core representation, avoiding the use of classes as much as possible. In particular, the scheme gracefully handles any declarations that themselves cannot be converted, but occur in a converted module.

### Conversion status

We add to all declaration that are affected by closure conversion a value of type

data StatusCC a = NoCC -- Declaration has not been converted | ConvCC a -- Here is the converted version

For example, `Id` gets a field of type `StatusCC Id`. A declaration `thisDecl` can be in one of three categories:

`NoCC`: We did not convert that declaration, either because it was declared in an unconverted module or because it uses some feature that prevents conversion.`ConvCC thisDecl`: Original and converted declaration coincide (e.g., type declarations not involving arrows directly or indirectly).`ConvCC convDecl`: The variant`convDecl`is the closure-converted form of`thisDecl`.

### Conversion pairs

Conversion functions come in pairs, which we wrap with the following data type for convenience:

data a :<->: b = (:<->:) {to :: a -> b, fr ::b -> a}

### Converting type declarations

#### Preliminaries

The alternatives of `TyCon.TyCon` get a new field `tyConCC :: StatusCC (TyCon, Id)`. This field is `NoCC` for data constructors for which we have no conversion and `ConvCC (T_CC, iso_T)` if we have a conversion, where the converted declaration `T_CC` may coincide with `T`. The value `iso_T` is a *conversion constructor* for values inhabitating types formed from the original and converted constructor. The type of these functions is as follows:

isoTy (T::k1->..->kn->*) = forall _1 .. _n _1_CC .. _n_CC. isoTy (_1::k1) -> .. -> isoTy (_n::kn) -> (C _1 .. _n :<->: C_CC _1_CC .. _n_CC)

(The type variables beginning with underscores are bound here; we add one underscore for each level of kinding.)

As an example, consider

data T (f::*->*) = T1 (f Int) | T2 (f Bool)

The type of the conversion constructor is as follows (using more meaningful type variable names):

isoTy (T::(*->*)->*) = forall f f_CC. (forall a a_CC. (a :<->: a_CC) -> (f a :<->: f_CC a_CC)) -> T f :<->: T_CC f_CC

The conversion constructor might be implemented as

isoT isof = toT :<->: frT where toT (T1 x) = T1 (to (tff tfInt ) x) toT (T2 y) = T2 (to (tff tfBool) y) frT (T1 x) = T1 (fr (tff tfInt ) x) frT (T2 y) = T2 (fr (tff tfBool) y)

where `isoInt` and `isoBool` are the conversion constructors for `Int`s and `Bool`s.

Moreover, we represent closures - the converted form of function arrows - as follows:

data a :-> b = forall e. !(e -> a -> b) :$ e isoArr :: a :<->: a_CC -> b :<->: b_CC -> (a -> b) :<->: (a_CC :-> b_CC) isoArr (toa :<->: fra) (tob :<->: frb) = toArr :<->: frArr where toArr f = const (tob . f . fra) :$ () frArr (f :$ e) = frb . f e . toa

#### Conversion rules

If a type declaration for constructor `T` occurs in a converted module, we need to decide whether to convert the declaration of `T`. We decide this as follows:

- If the declaration of
`T`mentions another type constructor`S`and we have`tyConCC S == NoCC`, we do not convert`T`and set its`tyConCC`field to`NoCC`as well. - If the declaration of
`T`uses any features that we cannot (or for the moment, don't want to) convert, we do not convert`T`and set its`tyConCC`field to`NoCC`. - If all type constructors
`S`mentioned in`T`'s definiton have`tyConCC S == ConvCC S`, we do not convert`T`and set its`tyConCC`field to`ConvCC (T, isoT)`generating a suitable conversion constructor`isoT`. (NB: This implies that`T`does not mention any function arrows.) - Otherwise, we generate a converted type declaration
`T_CC`together a conversion constructor`isoT`, and set`tyConCC`to`ConvCC (T_CC, isoT)`.

Note that basic types, such as `Int` and friends, should have `tyConCC` set to `ConvCC (Int, isoInt)` with identity conversions `isoInt = id :<->: id`.

### Converting class and instances

We don't alter class and instance declarations in any way. However, the dictionary type constructors and dfuns are processed in the same way as other data types and value bindings, respectively; i.e., they get a `StatusCC` field and we generate converted versions and conversion constructors as usual.

chak: revision front

### Converting instance declarations

If we encounter an instance declaration for `C tau` during conversion, there are two alternatives: we have a conversion for `C` or not:

- if we do not have a conversion, we generate an instance (and hence dfun) for
`C tau^`, where`tau^`is the closure converted`tau`; - if we have a conversion, we generate an instance for
`C_CC tau^`.

In any case, we add a field `is_CC :: StatusCC Instance` to `InstEnv.Instance` that contains the additionally generated instance. And in both cases, we should be able to derive the required code for the dfun from the definition of `C tau`. We also make sure that the `dfun`'s `idCC` field (see below) is set to that of the converted dfun.

### Converting type terms

We determine the converted type `t^` of `t` as follows:

T^ = T_CC , if available T , otherwise a^ = a (t1 t2)^ = t1^ t2^ (t1 -> t2)^ = Clo t1 t2 (forall a.t)^ = forall a.t^ (C t1 => t2)^ = C_CC t1^ => t2^ , if available C t1^ => t2^ , otherwise

### Converting value bindings

When converting a toplevel binding for `f :: t`, we generate `f_CC :: t^`. The alternatives `GlobalId` and `LocalId` of `Var.Var` get a new field `idCC :: StatusCC Id` whose values, for a declaration `f`, we determine as follows:

- If
`Id`'s declaration uses any features that we cannot (or currently, don't want to) convert, set`idCC`to`NoCC`. - If all type constructors involved in
`f`'s type are marked`NoCC`or`AsIsCC`, we set`f`'s`idCC`field to`AsIsCC`. - Otherwise, convert
`f`and set its`ifCC`field to`ConvCC f_CC`.

### Converting core terms

Apart from the standard rules, we need to handle the following special cases:

- We come across a value variable
`v`where`idCC v == NoCC`whose type is`t`: we generate`convert t v`(see below). - We come across a case expression where the scrutinised type
`T`has`tyConCC T == NoCC`: we leave the case expression as is (i.e., unconverted), but make sure that the`idCC`field of all variables bound by patterns in the alternatives have their`idCC`field as`NoCC`. (This implies that the previous case will kick in and convert the (unconverted) values obtained after decomposition.) - Whenever we have an FC
`cast`from or to a newtype`T`, where`tyConCC T == NoCC`, we need to add a`convert tau`or`trevnoc tau`, respectively. We can spot these casts by inspecting the kind of every coercion used in a cast. One side of the equality will have the newtype constructor. - We come across a dfun: If its
`idCC`field is`NoCC`, we keep the selection as is, but apply`convert t e`from it, where`t`is the type of the selected method and`e`the selection expression. If`idCC`is`ConvCC d_CC`, and the dfun's class is converted,`d_CC`is fully converted. If it's class is not converted, we also keep the selection unconverted, but have a bit less to do in`convert t e`.**TODO**This needs to be fully worked out.

### Generating conversions

Whenever we had `convert t e` above, where `t` is an unconverted type and `e` a converted expression, we need to generate some conversion code. This works roughly as follows in a type directed manner:

convert T = id , if tyConCC T == NoCC or AsIsCC = to_T , otherwise convert a = id convert (t1 t2) = convert t1 (convert t2) convert (t1 -> t2) = createClosure using (trevnoc t1) and (convert t2) on argument and result resp.

where `trevnoc` is the same as `convert`, but using `from_T` instead of `to_T`.

The idea is that conversions for parametrised types are parametrised over conversions of their parameter types. Wherever we call a function using parametrised types, we will know these type parameters (and hence can use `convert`) to compute their conversions. This fits well, because it is at occurences of `Id`s that have `idCC == NoCC` where we have to perform conversion.

The only remaining problem is that a type parameter to a function may itself be a type parameter got from a calling function; so similar to classes, we need to pass conversion functions with every type parameter. So, maybe we want to stick `fr` and `to` into a class after all and requires that all functions used in converted contexts have the appropriate contexts in their signatures.

### Issues, aka rl's complaints

#### Unboxed types

Consider

data Int = Int# I#

The declaration has no arrow, so we set its `tyConCC` field to `ConvCC Int` (given that we know that all unboxed types can be used unaltered). Moreover, `Int# :: I# -> Int` has no converted form as is has an unboxed argument.

#### Non-converted versus unchanged type declarations

**This issue has now been addressed.**

Many type declarations will not be changed by conversion, as they do not contain any arrows. Hence, it is more economic to avoid generating a `_CC` version of these declarations. I initially thought that we can ignore this for a moment, because it is only an optimisation. However, consider

data T = MkT Int data S = MkS (Int -> Int)

As we don't convert `Int`, we cannot convert `T` and `S`, which is a shame as their conversion is simple and (in the vectorisation case may affect performance dramatically). As a matter of fact, if we identify declarations that need not be converted, then we would mark `Int` and `T` as such and can convert `S` easily.

#### FC Coercions

**This issue has now been addressed.**

Closure conversion happens on Core, which means that constructors, such as `MkT` of

-- unconverted newtype T a = MkT (a -> a)

in a definition

-- converted foo :: (a -> a) -> T a foo f = MkT f

have vanished, leaving only a coercion. As `T` is not converted, we need to notice that we need to generate `MkT (fr f)`. So, we need to spot the conversion representing `MkT`.

Generally, we need a story about treating coercions during conversion.

#### Function type constructor

It is clear how to treat types involving subtypes of the form `a -> b`. It is less clear how to deal with partial applications of `(->)`. Consider

-- unconverted data T f = T (Int -> Int) (f Int Int)

used as `T (->)` in converted code. What is `convert (T (->))`?

#### Classes

**This issue has now been addressed**

It might be sufficient to never convert class declarations as a whole, but only their representation types.

#### Original functions

The previous story was that when vectorising `f` and generating `f_CC`, we now define

f :: tau f = trevnoc tau f_CC

Now, with the approximate conversion scheme above, we may not have `trevnoc tau`. In this case, we still generate `f_CC`, but also leave the rhs of `f` alone (i.e., compile the original functions).

When we give up on converting a complete right-hand side, we still want to convert all subexpressions that we can convert.