|Version 47 (modified by kili, 6 years ago) (diff)|
Porting GHC to a new platform
NOTE: Versions supported: 6.11+.
NOTE: there are bugs in this procedure; see #3472
This section describes how to port GHC to a currently unsupported platform. To avoid confusion, when we say "architecture" we are referring to the processor, and we use the term "platform" to refer to the combination of architecture and operating system.
The first step in porting to a new platform is to get an unregisterised build working. An unregisterised build is one that compiles via vanilla C only. This costs about a factor of two in performance, but since unregisterised compilation is usually just a step on the way to a full registerised port, we don't mind too much.
You should go through this process even if your architecture is already has registerised support in GHC, but your OS currently isn't supported. In this case you probably won't need to port any of the architecture-specific parts of the code, and you can proceed straight from the unregisterised build to build a registerised compiler.
Notes on GHC portability in general: we've tried to stick to writing portable code in most parts of the system, so it should compile on any POSIXish system with gcc, but in our experience most systems differ from the standards in one way or another. Deal with any problems as they arise - if you get stuck, ask the experts on glasgow-haskell-users@….
Lots of useful information about the innards of GHC is available in the Commentary, which might be helpful if you run into some code which needs tweaking for your system.
Cross-compiling to produce an unregisterised GHC
NOTE! These instructions apply to GHC 6.11 and (hopefully) later.
In this section, we explain how to bootstrap GHC on a new platform, using unregisterised intermediate C files. We haven't put a great deal of effort into automating this process, for two reasons: it is done very rarely, and the process usually requires human intervention to cope with minor porting issues anyway.
The following step-by-step instructions should result in a fully working, albeit unregisterised, GHC. Firstly, you need a machine that already has a working GHC (we'll call this the host machine), in order to cross-compile the intermediate C files that we will use to bootstrap the compiler on the target machine. We'll assume that you are porting to platform plat, e.g. plat may be x86_64-unknown-linux.
On the target machine
Unpack a source tree (preferably a released version). We will call the path to the root of this tree <T>.
In the instructions that follow, "<T>$ cmd" means that the current directory should be <T> when executing the command "cmd".
If your target platform requires it, then you may need to set CFLAGS appropriately here, e.g.
$ export CFLAGS=-m64
Now begin with:
<T>$ cp /bin/pwd utils/ghc-pwd/ghc-pwd <T>$ sh boot <T>$ ./configure --enable-hc-boot --build=plat --host=plat --target=plat
You might need to update configure.ac to recognise the new platform, and re-generate configure with autoreconf.
If necessary on your platform, you may again need to create a mk/build.mk to pass any necessary flags to gcc, e.g.:
SRC_CC_OPTS += -m64
As of June 23rd, 2009, GHC HQ has exorcised and split out GMP from the runtime system into the separate 'integer-gmp' package. If you are bootstrapping a compiler and are going to use integer-gmp for your Integer type, instead of 'integer-simple' which is a pure Haskell equivalent, then you will need to run configure in libraries/integer-gmp here as well:
<T>$ cd libraries/integer-gmp <T>$ ./configure <T>$ cd ../..
ToDo: explain how to use the 'integer-simple' package.
<T>$ make bootstrapping-files
On the host machine
Unpack a source tree (exactly the same version as before). Call this directory <H>.
<H>$ sh boot <H>$ ./configure --target=plat
Create <H>/mk/build.mk, with the following contents:
GhcUnregisterised = YES GhcLibHcOpts = -O -fvia-C -keep-hc-files GhcRtsHcOpts = -keep-hc-files GhcLibWays = v SplitObjs = NO GhcWithNativeCodeGen = NO GhcWithInterpreter = NO GhcStage1HcOpts = -O GhcStage2HcOpts = -O -fvia-C -keep-hc-files SRC_HC_OPTS += -H32m GhcWithSMP = NO utils/ghc-pkg_dist-install_v_HC_OPTS += -keep-hc-files
- copy LeadingUnderscore setting from target.
Copy <T>/includes/ghcautoconf.h, <T>/includes/DerivedConstants.h, and <T>/includes/GHCConstants.h to <H>/includes. Note that we are building on the host machine, using the target machine's configuration files. This is so that the intermediate C files generated here will be suitable for compiling on the target system.
Now build the compiler:
You may need to work around problems that occur due to differences between the host and target platforms. You may also need to use make -k in order to ignore unimportant build failures in the RTS.
<H>$ rm -f list mkfiles boot.tar.gz <H>$ find . -name "*.hi" >> list <H>$ find . -name "*.hc" >> list <H>$ find . -name "*_stub.c" >> list <H>$ find . -name "*_stub.h" >> list <H>$ find . -name package-data.mk >> list <H>$ find . -name package.conf.d >> list <H>$ find . -name package.conf.inplace >> list <H>$ echo compiler/main/Config.hs >> list <H>$ echo compiler/prelude/primops.txt >> list <H>$ ls compiler/primop-*.hs-incl >> list <H>$ find . -name .depend | sed -e 's/^/mkdir -p `dirname /' -e 's/$/`/' >> mkfiles <H>$ find . -name .depend | sed "s/^/touch /" >> mkfiles <H>$ echo mkfiles >> list <H>$ tar -zcf boot.tar.gz -T list
On the target machine
<T>$ cp /bin/pwd utils/ghc-pwd/ghc-pwd
<T>$ sh boot <T>$ ./configure --enable-hc-boot --build=plat --host=plat --target=plat
Unpack <H>/boot.tar.gz to <T>/.
<T>$ tar --touch -zxf boot.tar.gz <T>$ sh mkfiles
Put this in <T>/mk/build.mk:
GHC = false GHC_PKG_INPLACE = GHC_CABAL_INPLACE = DUMMY_GHC_INPLACE = UNLIT = NO_INCLUDE_DEPS = YES GhcUnregisterised = YES GhcLibWays = v SplitObjs = NO GhcWithNativeCodeGen = NO GhcWithInterpreter = NO GhcWithSMP = NO ghc_stage2_v_EXTRA_CC_OPTS += -Llibraries/integer-gmp/gmp -lgmp -lm -lutil -lrt utils/ghc-pkg_dist-install_v_EXTRA_CC_OPTS += -Llibraries/integer-gmp/gmp -lgmp -lm -lutil -lrt
You should also consider putting:
SRC_CC_OPTS += -g -O0
in <T>/mk/build.mk. It'll make the resulting compiler slower, but it'll be a lot easier if you get segfaults etc later on.
<T>$ for c in libraries/*/configure; do ( cd `dirname $c`; sh configure ); done
Note that if you need some special arguments to configure on you platform (like --with-iconv-includes and --with-iconv-libraries on OpenBSD), you will have to pass them to the configure runs above, too.
<T>$ sed -i.bak "s#<H>#<T>#g" inplace/lib/package.conf.d/*.conf */*/package-data.mk */*/*/package-data.mk <T>$ touch -r inplace/lib/package.conf.d */*/package-data.mk */*/*/package-data.mk
Now make bootstrapping files; what we're really doing here is making libffi, and libgmp if necessary:
<T>$ make bootstrapping-files
<T>$ make all_ghc_stage2 2>&1 | tee c.log <T>$ make inplace/bin/ghc-pkg 2>&1 | tee gp.log <T>$ make inplace/lib/unlit
Don't bother with running make install in the newly bootstrapped tree; just use the compiler in that tree to build a fresh compiler from scratch, this time without booting from C files. Before doing this, you might want to check that the bootstrapped compiler is generating working binaries:
$ cat >hello.hs main = putStrLn "Hello World!\n" ^D $ <T>/inplace/bin/ghc-stage2 hello.hs -o hello $ ./hello Hello World!
Once you have the unregisterised compiler up and running, you can use it to start a registerised port. The following sections describe the various parts of the system that will need architecture-specific tweaks in order to get a registerised build going.
Porting the RTS
The following files need architecture-specific code for a registerised build:
- Defines the STG-register to machine-register mapping. You need to know your platform's C calling convention, and which registers are generally available for mapping to global register variables. There are plenty of useful comments in this file.
- Macros that cooperate with the mangler (see The mangler) to make proper tail-calls work.
- Support for foreign import "wrapper". Not essential for getting GHC bootstrapped, so this file can be deferred until later if necessary.
- The little assembly layer between the C world and the Haskell world. See the comments and code for the other architectures in this file for pointers.
- rts/sm/MBlock.h, rts/sm/MBlock.c
- These files are really OS-specific rather than architecture-specific. In MBlock.h is specified the absolute location at which the RTS should try to allocate memory on your platform (try to find an area which doesn't conflict with code or dynamic libraries). In Mblock.c you might need to tweak the call to mmap() for your OS.
The mangler is abstracted to a certain extent over some architecture-specific things such as the particular assembler directives used to herald symbols. Take a look at the definitions for other architectures and use these as a starting point for porting it to your platform.
The splitter is another evil Perl script (driver/split/ghc-split.lprl). It cooperates with the mangler to support object splitting. Object splitting is what happens when the -split-objs option is passed to GHC: the object file is split into many smaller objects. This feature is used when building libraries, so that a program statically linked against the library will pull in less of the library.
The splitter has some platform-specific stuff; take a look and tweak it for your system.
The native code generator
The native code generator isn't essential to getting a registerised build going, but it's a desirable thing to have because it can cut compilation times in half. The native code generator is described in detail in Commentary/Compiler/Backends/NCG.
To support GHCi, you need to port the dynamic linker (rts/Linker.c). The linker currently supports the ELF and PEi386 object file formats - if your platform uses one of these then things will be significantly easier. The majority of Unix platforms use the ELF format these days. Even so, there are some machine-specific parts of the ELF linker: for example, the code for resolving particular relocation types is machine-specific, so some porting of this code to your architecture and/or OS will probably be necessary.
If your system uses a different object file format, then you have to write a linker -- good luck!