|Version 10 (modified by simonmar, 8 years ago) (diff)|
Video: Getting and Building, layout of the source tree, how to set up build.mk (23'43")
Quick start for developers
This section is for those who want to do more than just build & install GHC. It is for those who want to actually modify parts of GHC, and perhaps distribute those modifications to others. This section contains a few nuggets of information that will help get you started right away. For more detailed documentation on the build system, read on to the later sections.
Setting up your build
The GHC build tree is set up so that, by default, it builds a compiler ready for installing and using. That means full optimisation, and the build can take a long time. If you unpack your source tree and right away say ./configure; make, expect to have to wait a while.
For hacking, you want the build to be quick - quick to build in the first place, and quick to rebuild after making changes. Tuning your build setup can make the difference between several hours to build GHC, and less than an hour. Here's how to do it.
If you're just interested in working on GHC, then you probably don't want the "extralibs" libraries that we normally ship with GHC, having these in your source tree will just make the build take longer. So when getting the sources, run darcs-all without the --extra option.
mk/build.mk is a GNU makefile that contains all your build settings. By default, this file doesn't exist, and all the parameters are set to their defaults in mk/config.mk (mk/config.mk is the place to look for all the things you might want to tune).
There's an example in mk/build.mk.sample, which you can copy to mk/build.mk and edit as required. Alternatively if you want to understand a bit more about what's going on (recommended), read on.
A good mk/build.mk to start hacking on GHC is:
SRC_HC_OPTS = -H32m -O -fasm -Rghc-timing GhcStage1HcOpts = -O0 -DDEBUG GhcLibHcOpts = -O -fgenerics GhcLibWays = SplitObjs = NO
What do these options do?
- SRC_HC_OPTS = -H32m -O -fasm -Rghc-timing
- These options are added to the command line for all Haskell compilations. We turn on -fasm, because that halves compilation time at the expense of a few percent performance. -Rghc-timing prints out a line of timing info about each compilation. It's handy to keep an eye on.
- GhcStage1HcOpts = -O0 -DDEBUG
The options for building the stage1 compiler (these come after
SRC_HC_OPTS, so you can override settings from there). We turn off
optimisation here, assuming you'll be modifying and testing stage1.
With optimisation off, rebuilding GHC after modifying it will be
much quicker, not only because the individual compilations will be
quicker, but also there will be fewer dependencies between modules,
so less stuff needs to be rebuilt after each modification.
Also we turn on -DDEBUG, because that enables assertions and debugging code in the compiler itself. Turning on DEBUG makes the compiler about 30% slower.
- GhcLibHcOpts = -O -fgenerics
- You almost certainly want optimisation on when building libraries, otherwise the code you build with this compiler goes really slowly. -fgenerics add generics support to the libraries - you can turn this off if you like (it'll make the libraries a bit smaller), but you won't be able to use Generics in the code you build against these libraries.
- GhcLibWays =
- Normally the profiled libs are built. Setting GhcLibWays to empty disables this, so you only build the normal libs.
- SplitObjs = NO
- Object splitting causes each module to be split into smaller pieces in the final library, to reduce executable sizes when linking against the library. It can be quite time and memory-consuming, so turn it off when you're hacking.
Actually building the bits
To just build everything, from the top level:
$ autoreconf $ ./configure $ make
NB. that's autoreconf, not just autoconf. The former works recursively, which is necessary because the GHC tree contains multiple configure scripts.
(See here for what can go wrong.)
If you just want to build stage 1, then instead you can say
$ make stage1
but note that the stage 1 compiler doesn't support GHCi or Template Haskell, those are compiled into stage 2 only (see BootstrappingGHC).
To install the compiler you built, you can say
$ make install
However, you don't need to install GHC to use it. Running ./compiler/stage1/ghc-inplace from the build tree will invoke the stage1 compiler, and ./compiler/stage2/ghc-inplace will invoke the stage2 compiler.
Building individual parts of the tree
The first thing to understand is that the source tree is built in two passes. First make boot builds dependencies and any other tools required as part of the build itself. For example, utils/genprimopcode is built as part of make boot, because it is required to preprocess compiler/prelude/primops.txt.pp.
After make boot, make will build everything.
If you say make from the very top-level, the build system will arrange to do the appropriate 'make boot' steps for you. If you just want to build in a subdirectory (eg. ghc), you have to do make boot yourself. You don't need to make boot after every single change, but you might want to do it to update dependencies, for example.
Refining the setup
If you will be hacking mostly on libraries, then you probably want to build stage1 with optimisation, because you're only building it once but using it many times.
GhcStage1HcOpts = -O
If you are working on GHCi or Template Haskell, then you will be building and modifying the stage 2 compiler. Hence, you want to build stage 1 with, and stage 2 without, optimisation.
GhcStage1HcOpts = -O GhcStage2HcOpts = -O0 -DDEBUG
Take a look through mk/config.mk for more settings you might want to override in build.mk. Remember: don't modify config.mk directly (it gets overwritten when you run ./configure).
To turn up everything to the max, for running performance tests for example, try these:
SRC_HC_OPTS = -H64m -O2 GhcLibHcOpts = -O2 SplitObjs = YES
You can even add some more aggresive options, such as -fliberate-case-threshold50, -funfolding-use-threshold50.
Here is a roadmap to the source tree.