wiki:Building/CrossCompiling

Version 16 (modified by StephenBlackheath, 14 months ago) (diff)

--

Cross-compiling GHC

This page describes how to do cross-compilation with GHC. That is:

  • Building GHC as a cross-compiler: Create a compiler that runs on one platform, but targets another. Examples are building a GHC that:
    • runs on Mac OS X, but targets iOS
    • runs on x86_64 linux, but targets i386
    • runs on some existing GHC supported platform, but targets a smaller embedded platform
  • Cross-compiling GHC itself: Build on one platform a compiler that runs on, and targets another. Examples:
    • TakeoffGW is a distribution of Unix tools for Windows, built by cross-compiling on a Linux machine. They would like to be able to build and distribute GHC this way. It might be useful for us to be able to cross-compile a Windows GHC from Linux too.
    • build a 64-bit GHC on OS X, by cross-compiling using the 32-bit version.
    • We could port to Win64 (#1884) by cross-compiling using a 32-bit Windows GHC.
    • Other porting tasks might be easier, given a suitable cross-compilation toolchain.

Terminology and background

(For more background and design docs see CrossCompilation.)

Traditional cross-compilation terminology defines three platforms:

  • build - the platform we're building on
  • host - the platform the compiler will run on
  • target - the platform the compiler we're building will generate code for

These are the platforms given to the configure script when configuring the build.

GHC does not support all three platforms being different. The rule is:

  • build must equal host

We'll see why that is if we consider which platforms the various parts of the build use.

  • Stage 0: the GHC that is already on the build system (the one you specify using --with-ghc when configuring the build), comes with a set of built libs, could be older than the version of GHC being built
  • libs boot: libs that the current version of GHC being built relies on that are either absent or too old in older versions of GHC that might be being used as Stage 0. These libs are built with Stage 0 GHC, and linked into the Stage 1 GHC being built.
  • Stage 1: the first GHC built, compiled by the Stage 0 GHC, and linked with both libs from that GHC installation, and the boot libs.
  • libs install: libs that are built by the Stage 1 GHC, and installed by make install.
  • Stage 2: the final GHC built, compiled by the Stage 1 GHC, and linked with libs-install
Stage 0 libs boot Stage 1 libs install Stage 2
built on --- build build build build
runs on build build host target target
targets build --- target --- target

(this is not the only way we could have done it, for more rationale see CrossCompilation)

So in order to use the stage 1 compiler to build libs-install, we must be able to run it, and hence host must be the same as build. You never need to specify host, just specify target when making a cross-compiler.

So considering the two cases we identified at the top of the page:

  • Building GHC as a cross-compiler - this is the stage 1 compiler
  • Cross-compiling GHC itself - this is the stage 2 compiler

both of these cases are handled in the same way.

Tools to install

First you want to install a C compiler and related tools that generate code for your target platform. You'll need:

  • gcc
  • ld
  • nm
  • objdump
  • C libraries

(basically gcc + binutils + libc). These need to be installed somewhere different from your native gcc & binutils so they don't conflict. We assume that your gcc knows where its libraries live, otherwise you will probably need to add more flags to your build.mk settings to tell it.

If you are using LLVM as your compiler back end, you will need to make sure the llc and opt executables are in your search path. No other configuration is necessary. Also see the ARM-specific note below.

Also install the other tools needed to build GHC on your platform: see Building/Preparation.

Getting your source tree

Follow the instructions in Building/GettingTheSources, except that when getting the subrepositories you should use

./sync-all --no-dph get

since the DPH libraries are built with stage 2, and we can't run the stage 2 compiler on the host platform when cross-compiling.

Configuring the build

The C cross-compiler and tools are usually installed with the platform name as a prefix, e.g. if the target platform is arm-linux-gnueabihf then the gcc cross-compiler is named arm-linux-gnueabihf-gcc. If your cross-compiling toolset is set up like this, then add the directory containing the tools to your PATH, and just say:

./configure --target=<target>

and configure will find all the tools, using <target> as the prefix.

If you need to specify the tools explicitly, then you can say

./configure --target=<target> --with-gcc=<gcc> --with-ld=<ld> --with-nm=<nm> --with-objdump=<objdump>

Note: if you are cross-compiling for a platform that doesn't have a native code generator or registerised LLVM support, then you should also add

  --enable-unregisterised

(the build system will probably do this automatically for you anyway, but it doesn't hurt to be explicit)

Your target triplet/quad must have the general form <arch>-<os>-<abi> or <arch>-<vendor>-<os>-<abi>. If configure complains that your arch, vendor or OS is unknown, then you will need to modify the checkArch(), checkVendor() or checkOS() function in aclocal.m4, then get autotools to re-create the configure script using the autoreconf command.

build.mk settings

Note: when you name your build.mk as <target>-build.mk then its settings will be effective for <target> and the regular build.mk will be ignored. This is handy if you build a regular GHC and/or cross-compilers from the same working directory, as it avoids the hassle of juggling with settings files.

If you are only interested in building a cross-compiler, then you can add

Stage1Only = YES

to your mk/build.mk, and the build system will stop before building stage 2. The resulting cross-compiler and tools can be installed as usual with 'make install'.

If your cross-toolset does not include the GMP library, then you should also add:

INTEGER_LIBRARY = integer-simple

since even though we have a copy of GMP in the GHC source tree, it cannot be cross-compiled (ToDo: why not?). You must put this in mk/build.mk before building anything, because INTEGER_LIBRARY cannot be changed without doing a full make distclean.

Using cabal

Extra packages can be installed using cabal with your cross-compiler. The recipe is:

  $ cabal --with-ghc=<cross-ghc> --with-ld=<ld> ...

You can do this even without installing your cross-compiler, just use $TOP/inplace/bin/ghc-stage1 as <cross-ghc>.

NB. you should ensure that the cross-compiled packages won't conflict with your native packages. If the version of your cross-ghc is dated, such as 7.7.20130116, then that may be enough to avoid a conflict.

Another way to do this is to modify your $HOME/.cabal/config to include the platform in the installation directory for packages:

install-dirs user
  libsubdir: $arch-$os/$pkgid/$compiler

Unfortunately this does not work at the moment, because cabal uses the wrong values for $arch and $os, see https://github.com/haskell/cabal/issues/1184.

CPU/platform specific notes

ARM

Only llvm versions == 3.0 and >= 3.2 support GHC for ARM targets. There was a regression in llvm version 3.1, the result of which is bad generated code that crashes.

iOS

See the Cross Compiling to iOS page, but also take note of the ARM-specific notes above.