|Version 3 (modified by simonmar, 7 years ago) (diff)|
The (new) GHC Build System
(this page will eventually replace Building/BuildSystem when the new build system is merged in)
This section contains everything you need to know in order to understand and modify the GHC build system. The build system is non-standard in various ways (to be explained shortly), and is decidedly non-trivial: do not attempt to modify it without having a grasp of the concepts that follow!
Each of the following subsections describes one of the idioms that we use in the build system. There are a handful of such idioms, and when you've understood them all you'll be able to understand most of the code you'll find in the build system. We'll describe the idioms first, and then get on to the specifics of how we build GHC.
Historical note: this is the third major revision of the GHC build system. The first incarnation was based on "jmake", a derivative of X11's "imake", which is based on using the C preprocessor to add macro capabilities and #include to plain make. The second incarnation used GNU make's extensions for including makefiles (but lost the ability to use macros, since at the time GNU make didn't have support for general macros). In this third revision, we use even more of GNU make's extensions, and we make a fundamental change to the design, as described in the next section.
Idiom: non-recursive make
Build systems for large projects often use the technique commonly known as "recursive make", where there is a separate Makefile in each directory that is capable of building that part of the system. The Makefiles may share some common infrastructure and configuration by using GNU make's include directive; this is exactly what the previous GHC build system did. However, this design has a number of flaws, as described in Peter Miller's Recursive Make Considered Harmful.
The GHC build system adopts the non-recursive make idiom. That is, we never invoke make from inside a Makefile, and the whole build system is effectively a single giant Makefile.
This gives us the following advantages:
- Specifying dependencies between different parts of the tree is easy. In this way, we can accurately specify many dependencies that we could not in the old recursive-make system. This makes it much more likely that when you say "make" after modifying parts of the tree or pulling new patches, the build system will bring everything up-to-date in the correct order, and leave you with a working system.
- More parallelism: dependencies are more fine-grained, and there is no need to build separate parts of the system in sequence, so the overall effect is that we have more parallelism in the build.
Doesn't this sacrifice modularity? No - we can still split the build system into separate files, using GNU make's include.
Specific notes related to this idiom:
- Individual directories have a ghc.mk file which typically contains the build instructions for that directory.
- The top-level of the build system is in Makefile and ghc.mk.
- Other parts of the build system are in mk/*.mk and rules/*.mk.
Idiom: stub makefiles
It's all very well having a single giant Makefile that knows how to build everything in the right order, but sometimes you want to build just part of the system. When working on GHC itself, we might want to build just the compiler, for example. In the recursive make system we would do cd ghc and then make. In the non-recursive system we can still achieve this by specifying the target with something like `make ghc/stage1/build/ghc`, but that's not so convenient.
Our second idiom therefore is to have a tiny stub Makefile in each directory whose job it is to invoke the main Makefile specifying the appropriate target(s) for that directory. These stub Makefiles follow a simple pattern:
dir = libraries/base TOP = ../.. include $(TOP)/mk/sub-makefile.mk
where mk/sub-makefile.mk knows how to recursively invoke make. How does it know what to build? By convention, for each directory there is a target all_directory (e.g. all_libraries/base) which builds every target in that directory (see "Idiom: the "all" target", below).
Idiom: macros and variable names
Now that our build system is one giant Makefile, all our variables share the same namespace. Where previously we might have had a variable that contained a list of the Haskell source files called HS_SRCS, now we have one of these for each directory in the build system, so we have to give them all different names.
The idiom that we use for distinguishing variable names is to prepend the directory name to the variable. So for example the list of Haskell sources in the directory utils/hsc2hs would be in the variable utils/hsc2hs_HS_SRCS (make doesn't mind slashes in variable names).
In many parts of the build, we can build the same component in multiple different ways. For example, the compiler itself is built in the stage1 and stage2 ways, so we additionally need to distinguish variable names based on which way we're building. Typically we place each build in a separate subdirectory, so for example the stage1 build of the compiler places its files in compiler/stage1. Variable names related to this build would be named something like compiler_stage1_HS_SRCS. The pattern is therefore: directory_build_variable.
The build system makes extensive use of macros. A macro is defined in GNU make using define, e.g.
define build-package # args: $1 = directory, $2 = build ... makefile code to build a package ... endef
(for example, see rules/build-package), and is invoked like this:
$(eval $(call build-library,libraries/base,dist))
(this code would be in libraries/base/ghc.mk).
Note that eval works like this: its argument is expended as normal, and then the result is interpreted by make as makefile code. This means the body of the define gets expanded twice. Typically this means we need to use $$ instead of $ everywhere in the body of define.
Now, the build-package macro may need to define local variables. There is no support for local variables in macros, but we can define variables which are guaranteed to not clash with other variables by preceding their names with a string that is unique to this macro call. A convenient unique string to use is directory_build_; this is unique as long as we only call each macro with a given directory/build pair once. Most macros in the GHC build system take the directory and build as the first two arguments for exactly this reason. For example, here's an excerpt from the build-prog macro:
define build-prog # $1 = dir # $2 = distdir # $3 = GHC stage to use (0 == bootstrapping compiler) $1_$2_INPLACE = $$(INPLACE_BIN)/$$($1_$2_PROG) ...
So if build-prog is called with utils/hsc2hs and dist for the first two arguments, after expansion make would see this:
utils/hsc2hs_dist_INPLACE = $(INPLACE_BIN)/$(utils/hsc2hs_dist_PROG)
The idiom of $$($1_$2_VAR) is very common throughout the build system - get used to reading it! Note that the only time we use a single $ in the body of define is to refer to the parameters $1, $2, and so on.
Idiom: phase ordering
NB. you need to understand this section if either (a) you are modifying parts of the build system that include automatically-generated Makefile code, or (b) you need to understand why we have a top-level Makefile that recursively invokes make.
The main hitch with non-recursive make arises when parts of the build system are automatically-generated. The automatically-generated parts of our build system fall into two main categories:
- Dependencies: we use ghc -M to generate make-dependencies for Haskell source files, and similarly gcc -M to do the same for C files. The dependencies are normally generated into a file .depend, which is included as normal.
- package-data.mk. Many of the components of the GHC build system are also Cabal packages, with package metadata defined in a foo.cabal file. For the GHC build system we need to extract that metadata and use it to build the package. This is done by the program ghc-cabal (in utils/ghc-cabal in the GHC source tree). This program reads foo.cabal and produces package-data.mk containing the package metadata in the form of makefile bindings that we can use directly.
Now, we also want to be able to use make to build these files, since they have complex dependencies themselves (in order to build package-data.mk we need to first build ghc-cabal etc., and a .depend file needs to be re-generated if any of the source files have changed).
GNU make has a clever strategy for handling this kind of scenario. It first reads all the included Makefiles, and then tries to build each one if it is out-of-date, using the rules in the Makefiles themselves. When it has brought all the Makefiles up-to-date, it restarts itself to read the newly-generated Makefiles.
This works fine, unless there are dependencies between the Makefiles. For example in the GHC build, the .depend file for a package cannot be generated until package-data.mk has been generated and make has been restarted to read in its contents, because it is the package-data.mk file that tells us which modules are in the package. But make always makes all the Makefiles before restarting - it doesn't know how to restart itself earlier when there is a dependency between Makefiles.
Consider the following makefile:
all : include inc1.mk inc1.mk : Makefile echo "X = C" >$@ include inc2.mk inc2.mk : inc1.mk echo "Y = $(X)" >$@
Now try it:
$ make -f fail.mk fail.mk:3: inc1.mk: No such file or directory fail.mk:8: inc2.mk: No such file or directory echo "X = C" >inc1.mk echo "Y = " >inc2.mk make: Nothing to be done for `all'.
make built both inc1.mk and inc2.mk without restarting itself between the two (even though we added a dependency on inc1.mk from inc2.mk).
The solution we adopt in the GHC build system is as follows. We have two Makefiles, the first a wrapper around the second.
# top-level Makefile % : $(MAKE) -f inc.mk PHASE=0 just-makefiles $(MAKE) -f inc.mk $<
# inc.mk -include inc1.mk inc1.mk : Makefile echo "X = C" >$@ ifneq "$(PHASE)" "0" include inc2.mk inc2.mk : inc1.mk echo "Y = $(X)" >$@ endif just-makefiles: @: # do nothing clean : rm -f inc1.mk inc2.mk
each time make is invoked, it first invokes inc.mk with PHASE=0. This brings inc1.mk up-to-date (and only inc1.mk). The second time we invoke make, we can be sure that inc1.mk is up-to-date and proceed to generate inc2.mk. This is not at all pretty, and re-inovking make every time is slow, but we don't know of a better workaround for this problem.
In the case of the GHC build system we need 4 such phases, see the comments in the top-level ghc.mk for details.
Idiom: no double-colon rules
Make has a special type of rule of the form target :: prerequisites, with the behaviour that all double-colon rules for a given target are executed if the target needs to be rebuilt. This style was popular for things like "all" and "clean" targets in the past, but it's not really necessary. We adopt the following idiom instead:
all : all_foo .PHONY all_foo all_foo : ...
Idiom: the vanilla way
Libraries can be built in several different "ways", for example "profiling" and "dynamic" are two ways. Each way has a short tag associated with it; "p" and "dyn" are the tags for profiling and dynamic respectively. In previous GHC build systems, the "normal" way didn't have a name, it was just always built. Now we explicitly call it the "vanilla" way and use the tag "v" to refer to it.
This means that the GhcLibWays variable, which lists the ways in which the libraries are built, must include "v" if you want the vanilla way to be built (this is included in the default setup, of course).
Idiom: the "all" and "clean" targets
There are pre-canned macros to define your "all" and "clean" targets, take a look in rules/all-target.mk and rules/clean-target.mk.