|Version 15 (modified by shepheb, 7 years ago) (diff)|
Everything from here to the "Original Page" heading is for the revival in July 2008.
A Hackathon in the San Diego area for sometime in 2008 was suggested. Thoughts?
The Influence of GHC 6.10
Any notable pending changes we need to wait for? Do we need to wait for the final 6.10 release?
All developers, what ARM-based devices do you have available for testing?
- shepheb has a Nokia N810.
First Unregisterised Hack Notes
This documents shepheb's first attempt at a crude, unregisterised build for the Nokia N810 using Maemo 4 Diablo and the Maemo SDK (scratchbox-based)
I'm following the Building/Porting guide's section on porting to a new platform.
utils/pwd/pwd is an x86 binary, and there's no GHC to recompile it
The guide's suggestion to run
./configure --enable-hc-boot --enable-hc-boot-unregisterised
fails because utils/pwd/pwd is a Haskell binary that I can't run, since this is the ARM-based emulated target system and not the x86 it was compiled for. I can't reach the host's GHC to recompile it, so I just replaced it with the hacky
#!/bin/sh echo /home/braden/ghc/ghc-6.9.20080614
and the above ./configure worked fine.
cd includes make
step in the porting guide fails with an error message implying that libgmp headers were missing. Well clearly, they aren't included in the Maemo SDK. I grabbed the GMP sources inside the SDK scratchbox environment, and did
./configure make make check make install
and all was well. Since make check passed, I have to hope it (cross-)compiled properly and I have a working libgmp now.
After that the includes/ make worked fine. That completes the target-side part for now.
GHC port for arm-unknown-linux-gnu
My goal is to create a registerised port of GHC to the nokia 770.
There is currently an unregisterised build available for Maemo 1.x. This project is temporarily on hold while two big transitions take place:
- Maemo 2.0 supports the new EABI standard which affects a bunch of things (done) (for more info see http://wiki.debian.org/ArmEabiPort )
- GHC 6.6 release (soon)
Setting up the build environment
I have been using the standard maemo cross-development environment. Instructions for setting up this environment can be found here:
Changes to standard procedure
The updated instructions on this page should now work:
With two small changes:
(1) I had to add --srcdir=.
Anyplace configure is called I get this error:
This configuration does not support the `--srcdir' option..
Adding --srcdir=. makes the error go away.
(2) ghc/Makefile SUBDIRS ordering
This has been fixed in head, but if you download the 6.4.2 release you will need to edit ghc/Makefile and change the ordering of the SUBDIRS so that lib comes before compiler.
This is the default ordering:
ifeq "$(BootingFromHc)" "YES" SUBDIRS = includes rts docs compiler lib utils driver else
and you want
ifeq "$(BootingFromHc)" "YES" SUBDIRS = includes rts docs lib compiler utils driver else
That should get to the point of having a ghc-inplace built.
NOTE: if you try to move the directory to a new location or name, the inplace compiler will stop working because it has absolute paths hard coded to the current location.
Build ghc using ghc-inplace
(1) unroll the ghc source tarball into a new directory.
(2) ./configure --srcdir=. --with-ghc=/abs/path/to/ghc-inplace
(3) create a mk/build.mk with these two lines:
GhcUnregisterised = YES GhcWithNativeCodeGen = NO
(5) make install
I think there may have been one other step in there somewhere...
This should build and install ghc. Unfortunately, the floating point code will be broken.
Run the test suite
(1) get the testsuite that corresponds to your release, for example:
(2) untar it in the ghc-6.4.2 directory.
(3) edit mk/test.mk and change the -e config.time_prog line to:
-e config.timeout_prog=\"\" \
I had to do this because the timeout program interacted badly with the scratchbox shell causing all the tests to timeout and fail.
(4) cd to test/ghc-regress
(5) make TEST_HC=ghc fast
(5) make TEST_HC=ghc # for a longer test
Step By Step Porting to Maemo 2.0
T & H wget http://www.haskell.org/ghc/dist/6.6/ghc-6.6-src.tar.bz2 tar -xvjf ghc-6.6-src.tar.bz2 cd ghc-6.6
T $ ./configure --enable-hc-boot --enable-hc-boot-unregisterised --srcdir=. $ cd includes $ make
H $ ./configure --srcdir=.
Create H/mk/build.mk, with the following contents:
H GhcUnregisterised = YES GhcLibHcOpts = -O -fvia-C -keep-hc-files GhcRtsHcOpts = -keep-hc-files GhcLibWays = SplitObjs = NO GhcWithNativeCodeGen = NO GhcWithInterpreter = NO GhcStage1HcOpts = -O GhcStage2HcOpts = -O -fvia-C -keep-hc-files SRC_HC_OPTS += -H32m GhcBootLibs = YES
Change Target* and TARGET* variables in H/mk/config.mk
H TARGETPLATFORM = arm-unknown-linux TargetPlatform_CPP = arm_unknown_linux TargetArch_CPP = arm arm_unknown_linux_TARGET = 1 arm_TARGET_ARCH = 1
Copy T/ghc/includes/ghcautoconf.h, T/ghc/includes/DerivedConstants.h, and T/ghc/includes/GHCConstants.h to H/ghc/includes. Note that we are building on the host machine, using the target machine's configuration files. This is so that the intermediate C files generated here will be suitable for compiling on the target system.
Touch the generated configuration files, just to make sure they don't get replaced during the build:
H $ cd H/ghc/includes $ touch ghcautoconf.h DerivedConstants.h GHCConstants.h mkDerivedConstants.c $ touch mkDerivedConstantsHdr mkDerivedConstants.o mkGHCConstants mkGHCConstants.o
I just followed the guide upto making the hc bundle. I had to comment out this line in H/Makefile:
# echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
because that file does not seem to exist anymore.
Oops, I mis-read the directions, so this next section is junk.
Build the compiler on the host. There seems to be a circular depends between utils and compat so I had to hack it a bit. First edit H/utils/Makefile and remove ghc-pkg from the SUBDIRS list in the else clause.
H else SUBDIRS = mkdependC mkdirhier runstdtest hasktags hp2ps hsc2hs \ parallel prof unlit genprimopcode genapply runghc endif
Then run 'make boot' in the utils directory
H $ cd H/ghc-6.6/utils $ make boot
Now restore ghc-pkg to the SUBDIRS line:
H else SUBDIRS = mkdependC mkdirhier runstdtest ghc-pkg hasktags hp2ps hsc2hs \ parallel prof unlit genprimopcode genapply runghc endif
And build H/ghc-6.6/compat and then utils:
H $ cd H/ghc-6.6/compat $ make boot && make $ cd H/ghc-6.6/utils $ make boot && make